Star Micronics Multi-Font XR-1020 Manual do Utilizador Página 71
- Página / 110
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
DOT ADJUSTMENT MODE
This mode is used to adjust the alignment of the print head on successive bi-
directional passes.
After a period of some months, your printer may work itself out of alignment
on left and right printing passes, showing itself most obviously in graphics
printing. This mode will probably be used very rarely.
1.
Turn the printer off and then turn it on again while holding down the
[=ET’EJ~=T 1 and 1 ON LINE 1 buttons. The printer will then print
something like the following:
4.
When the three lines are aligned with each other to form one continuous
line, the bi-directional alignment test is completed.
5.
To change the mode for which the bi-directional adjustment is performed,
press the [ ON LINE
I .button. This will cycle between “HS Draft”,
“Draft”, “NLQ-A”, “NLQ-B
‘0 “GRAPHICS-A” and “GRAPHICS-B”.
Repeat the process for all print modes.
2. The printer will feed the paper forwards and backwards during this
operation, allowing you to view the paper for optimum alignment.
3.
To adjusttheprinting, use the [Sk6~~PT I and I PAPER FEED I buttons.
The !?‘?ZlF”’ button will move the second pass to the left. The
I PAPER FEED I button will move the second pass to the right.
-.
63
- XR-1020 1
- XR-1520 1
- HOW TO USE THIS MANUAL 3
- OF CONTENTS 5
- ON LINE button 6
- 7 PRINTER CONTROL COMMANDS 7
- 8 DOWNLOAD CHARACTERS 7
- Chapter 11 REFERENCE 8
- COMMAND SUMMARY 8
- Chapter I 9
- PRINTER COMPONENTS 10
- FONT STYLE EXAMPLE 12
- SETTING UP THE PRINTER 13
- UNPACKING AND INSPECTION 14
- SETTING UP 16
- Mounting the platen knob 16
- Print head 18
- Print head shield 18
- Interface cable 19
- Chapter 3 21
- Transparent part 22
- (SF- 1 ORMWI5RMII) 26
- -. - _ - . 28
- _ .- -.. 28
- Pull Tractor Un’ 29
- INTERFACE CARTRIDGES 30
- Cartridge 31
- PAPER INSTALLATIONAND USE 33
- LOADING FANFOLD FORMS 35
- (Push feed) 36
- Tractor cover 37
- Clamp lever 37
- Release lever 40
- Clamp lever 41
- Pull tractor unit 41
- Paper parking 42
- Paper unparking 43
- LOADING SINGLE SHEETS 44
- Paper loading lever 47
- [Single-Bin] 47
- Paper loading leve 48
- Chapter 5 49
- ON LINE button 50
- PAPER FEED button 50
- SET/EJECT/PARK button 51
- PITCH button 51
- MODE button 52
- FONT button 52
- ,t,, UPLh 53
- Long test mode 54
- Print area test mode 55
- Pitch lock mode 55
- Font lock mode 55
- Pitch and Font lock mode 55
- Hexadecimal dump 56
- Top of form 58
- Forward micro-feed 59
- Reverse micro-feed 59
- Selecting the print color 60
- Indicators 61
- Store Macro Definition 62
- SETTING UP THE 63
- MEMORY SWITCHES 63
- ON LINE 1 64
- ON LINE 64
- Print current settings 65
- Installation menu 66
- Font menu 67
- Character menu 67
- Print menu 68
- Paper menu 69
- Forms menu 69
- Factory settings 70
- DOT ADJUSTMENT MODE 71
- 1 ONLINE I--) 72
- ,:lL i-J-- it 72
- Chapter 7 73
- FONT CONTROL COMMANDS 74
- Select italic characters 75
- Se/ect NLQ font 75
- Select font 75
- Start underlining 77
- Stop underlining 77
- Star? 0 verlining 77
- Stop 0 verlining 77
- Superscript 78
- Subscript 78
- CHARACTER SET COMMANDS 79
- Select IBM code page 80
- Pica pitch 82
- Elite pitch 82
- Condensed printing 82
- Cancel condensed printing 82
- Expanded printing 83
- Cancel expanded printing 83
- Select proportional spacing 83
- I Decimal 84
- I <ESC> “!” n 84
- Select character size 85
- Return to normal height 86
- VERTICAL POSITION COMMANDS 87
- Execute <ES6 “A” 88
- Line feed 88
- Reverse line feed 88
- Feed paper n lines 89
- Set page length to n lines 90
- Set page length to n inches 90
- Set bottom margin 90
- Cancel bottom margin 90
- Form feed 90
- Disable paper-out detector 91
- Enable paper-out detector 91
- Set vertical tab stops 91
- Select vertical tab channel 92
- Vertical tab 92
- Set left margin 93
- Set right margin 93
- Left justify 95
- Center text 95
- Right justify 95
- Full justify 95
- Set horizontal tab stops 96
- Reset all tab stops 96
- Horizontal tab 96
- Relative horizontal tab 97
- GRAPHICS COMMANDS 98
- Select graphics mode 99
- Convert graphics density 99
- Select g-pin graphics mode 100
- 2730 Od 101
- 10 26 00 nl 101
- 27 38 0 nl 10 26 00 nl 102
- 14 m0 ml m2 102
- Select ROM character set 105
- Select print color 106
- Set MSB to 1 107
- Set MSB to 0 107
- Accept MSB as is 107
- Delete last character sent 107
- Cancel last line 107
- Set printer off-line 108
- Set printer on-line 108
- Bi-directional printing 108
- Uni-directional printing 109
- Manual feed 109
- Auto feed 109
- Select ASF bin #1 110
- Select ASF bin #2 110
- Eject paper from ASF 110
- Reset printer 110
Manuais e produtos relacionados com Digitalizar e Imprimir Star Micronics Multi-Font XR-1020
(152 páginas)
(147 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.076 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais