Star Micronics Multi-Font NX-2415 Manual do Utilizador Página 114

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 134
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 113
REPLACING THE BATTERY IN THE RAM CARD
The optional RAM card has an internal battery that backs up the stored data
even when the card is removed from the printer. This battery can be used for
more than four years. To avoid losing data from the RAM card, you should
replace the battery before the end of its service life. Follow the procedure
below.
1. Insert the RAM card in the printer as described in Chapter 1.
2.
Turn the power switch on to supply power to the RAM card.
3.
Unscrew the screw that holds the battery in place and set it aside.
4.
Remove the old battery, and install the new battery the same way as the
old.
5.
Fasten the battery holder plate with the screw.
6.
Turn off the power switch and remove the RAM card.
106
-
Vista de página 113
1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 133 134

Comentários a estes Manuais

Sem comentários