Star Micronics Multi-Font NX-2410 Manual do Utilizador descarregar pdf (Página 65)

PRINTER CONTROL COMMANDS

This appendix describes the printer’s control commands. The commands are

arranged by function. The name of each command is followed by a table like the

one below:

Mode

ASCII

Decimal

Hexadecimal

<ESC>

3” c‘ ” 1

27 120 49

1B 78 31

Both

<ESC>

“X” <I>

27 120 1

IB 78 01

Mode:

Indicates the mode in which the command is recognized.

Std.

Standard mode (DIP switch l-6 on)

IBM

IBM mode (DIP switch l-6 off)

Both

Both Standard and IBM modes

ASCII:

Indicates the ASCII coding of the command. Control

characters are enclosed in pointed brackets: For example.

< 1 > means character code 1.

Decimal:

Gives the command in decimal character codes.

Hexadecimal: Gives the command in hexadecimal character codes.

Parameters for which values must be supplied are indicated by italic letters

such as n.

Many commands have alternative forms. Some commands use < ESC >

(character code 27) in Standard mode and < FS > (character code 28) in IBM

mode. Other commands have parameters that can be specified as either character

codes or digit characters, like the parameter 1 in the sample command above.

FdNT CONTROL COMMANDS

Select draft quality characters

Mode ASCII

Decimal

Hexadecimal

<ESC> “XI’ “0” 27 120 48 1B 78 30

Both

<ESC> ?” co> 27 120 0 1B 78 00

Changes from letter quality to draft quality. Ignored if the printer was

set to stay in panel style at power-on.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 118 119

Comentários a estes Manuais

Sem comentários

Star Micronics Multi-Font NX-2410 Manual do Utilizador Página 65

Comentários a estes Manuais

Manuais e produtos relacionados com Impressoras de rótulos Star Micronics Multi-Font NX-2410